Single arm internal seam welder of light pole production line

Single arm internal seam welder of light pole production line is mainly used for welding small pipe diameter cylinders. The welding is carried out by the two-step welding method. With the oscillator and monitoring system, the weld seam is beautifully formed , The machine is easy to operate. It is an ideal equipment for power tower poles.

Single arm internal seam welder of light pole production line technical parameter

The length of the workpiece:12000mm

Horizontal Arm Telescopic Speed:120～1200mm/Min

Applicabel Tube Diameter:φ300-φ2000mm

Min. Welder Tube Diameter:φ300mm

Roller frame carrying weight:5 T

Horizontal Arm Lifting Speed:100-1000mm/Min

24kg precision rail:14 meters * 2

Single Arm Internal Welder Light Pole Production Line Machines/equipments Structure Introduction

Light pole/power pole/communication tower pole production line and equipment-single-arm internal welding machine consists of a cross arm, a lifting mechanism, a swing mechanism, a monitoring system, a welding tracking system, and electrical parts.

This machine does not move the welding arm, but can be raised and lowered. The lifting stroke is 250mm. The lifting mechanism uses a motor to drive the screw jack to achieve lifting. The welding arm is a welded part and consists of multiple sections. Each cross arm is connected by a flange, which is convenient for installation and transportation. The section of the section steel is changed from large to small, which ensures the rigidity of the cross arm and reduces the weight of the cross arm. After annealing Handling, durable.

The lifting mechanism is composed of a reducer, two screw lifts and four guide columns.

The workpiece is placed on the roller frame, and the welding process is completed by the walking of the roller frame. The roller frame is controlled by a frequency conversion motor, which has stable walking and low noise.

The welding arm head is equipped with a welding torch and a wire feeding mechanism for two protection welding, the welding torch is fixed on the oscillator, and a baffle is installed between the welding torch and the oscillator to prevent splashing during welding. When welding, adjust the swing amplitude as needed to make the weld seam beautiful.

When welding, a set of guide wheels are closely attached to the weld seam. After the guide wheels are tracked by a camera, the camera monitoring system is installed on the electric control box. The operator can operate as long as the operator looks at the display screen. The operation is simple and practical.

A counterweight device is installed at the other end of the welding arm to ensure balance with the front end.

The roller frame is placed on the processed 24kg rail, the rail is equipped with a rack, the workpiece is placed on the roller frame, and the welding is completed by the motor on the roller frame to rotate the gear. The motor is a variable frequency motor, which makes it run smoothly and reliably. The active and passive roller frames are connected by a coupling to ensure that the active and passive are consistent when walking.

There are displays and buttons on the wired remote control box, and all actions can be operated on the remote control box. The cable is 15 meters long.

All shaft parts (including shaft pins) are quenched and tempered.

Single Arm Internal Welder Light Pole Production Line Machines/equipments Welding oscillator technical parameters

Power:220VAC/50HZ (1 phase)

Swing speed:10-100/min

Swing Magnitude:5-15mm

Maximum load:4kg

The pause time range:0.1-2s

As one of the professional Light pole/power pole/communication tower pole production line machines and equipments, this product has a very important role. If you want to know more about Light pole/power pole/communication tower pole production line machines and equipments you can click to view the details, or contact us directly.